Roofing Services in Weston, FL

Weston is a master-planned community in western Broward County, almost entirely built since the 1980s as a planned suburb at the edge of the Everglades. The result is a roofing market unlike any other in the region: high-end housing stock, very strong HOA culture with deed restrictions across nearly every subdivision, predominantly concrete tile and metal roofs (almost no shingle), large lots, and a tree canopy that grew up with the community. Plus the western edge of Weston borders conservation land and the Everglades, which creates its own humidity-and-debris challenges.

BGI Roofing serves Weston across all the major sub-associations: Weston Hills, The Lakes, Bonaventure (including the Gables at Bonaventure), Savanna, Windmill Ranch Estates, and surrounding communities. We’re Florida-licensed (CCC1337074), HAAG-Certified for residential inspections, CertainTeed ShingleMaster, and a Polyglass Registered Contractor.

The Roofing Challenges Specific to Weston

• Strong HOA architectural control. Nearly every Weston subdivision has detailed material, color, and profile guidelines administered through a sub-association. Weston Hills, Gables at Bonaventure, and similar communities each have their own architectural review committee with its own requirements. We verify before quoting.
• Predominantly tile and metal. Asphalt shingle is uncommon in Weston — most HOAs require either concrete tile or standing-seam metal. We install both, and our quotes reflect what’s actually required for HOA compliance.
• High-end homes, larger roofs. Weston homes average significantly larger than the regional median. Replacement scope, material quantities, and project timelines scale accordingly.
• Tree canopy and conservation-area humidity. Mature oak and poinciana canopy plus proximity to wetlands means more organic debris on roofs and faster algae/moss growth than drier inland areas. Algae-resistant materials are worth specifying.
• Broward HVHZ permitting. Weston is in the Florida Building Code’s HVHZ alongside the rest of Broward and Miami-Dade. All products must carry Miami-Dade NOA approval.

What We Install in Weston

• Concrete S-tile and flat-profile tile — the dominant Weston roof type
• Standing-seam metal — increasingly popular in Weston for long service life and lower long-term maintenance
• Tile lift-and-reset when tile is sound and underlayment has failed
• Algae-resistant treatments on tile in heavy-canopy areas
• Modified bitumen (Polyglass) for the rare flat-roof sections

Weston Permitting Notes

City of Weston residential roof permits run through the city’s permitting services, and Weston is in the Florida Building Code HVHZ (170 mph design wind speed), so all products must be NOA-approved. Most Weston subdivisions require architectural review through the relevant sub-association before the city will issue a permit. We handle both tracks and build the timing into the project plan.

Why Weston Homeowners Choose BGI

• HOA-experienced — we know how to navigate Weston Hills, Bonaventure, and similar sub-association review processes
• Tile and metal specialty — the two materials that matter in Weston
• HAAG-Certified Inspector for storm and humidity-damage documentation
• Owner-supervised — Andrew Babeu walks every Weston job
• Manufacturer-backed installations — CertainTeed and Polyglass relationships for proper warranty registration

Free Weston Roof Inspection

Call (305) 894-6575 for a free inspection across Weston — Weston Hills, The Lakes, Bonaventure, Gables at Bonaventure, Savanna, Windmill Ranch Estates, and surrounding areas. Or use our instant estimator.

Weston Roofing FAQs

Do you work with Weston Hills, Gables at Bonaventure, and similar HOAs?
Yes. We prepare the architectural review submission, supply contractor credentials and insurance documentation, and coordinate the timing of sub-association approval with the city permit. Adds 2–6 weeks to the project front end depending on the specific HOA’s review schedule.

Should I switch from tile to metal on my Weston re-roof?
Depends on the HOA. Some Weston sub-associations allow metal as an alternative to tile; others require tile only. We verify with your specific HOA, and when metal is permitted we walk you through the trade-offs — metal lasts 40–70 years and handles tree-canopy debris better, but costs more upfront and is a different aesthetic.

What’s the deal with algae and moss on Weston tile?
Weston’s tree canopy and conservation-area humidity create ideal conditions for algae and moss growth on tile roofs. The solution is regular soft-wash cleaning (every 3–5 years) and choosing algae-resistant tile profiles on replacement. We can address both as part of any project.

Is Weston in the HVHZ?
Yes. The Florida Building Code’s High Velocity Hurricane Zone covers all of Broward and Miami-Dade. Every roofing product we install in Weston carries Miami-Dade NOA approval.

How much does a Weston tile or metal roof cost?
For a typical Weston home, tile replacement is in the $30,000–$80,000 range and standing-seam metal is in the $35,000–$90,000+ range depending on roof size, complexity, and material grade. A tile lift-and-reset is meaningfully less than full replacement when the existing tile is sound. We provide written, itemized estimates.